NETGEAR FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch, Cli Manual

Page: 431 / 558

Managed Switch CLI Manual, Release 8.0
Management Commands 7-26
v1.0, July 2009
no ip http secure-session hard-timeout
This command resets the hard timeout for secure HTTP sessions to the default value.
ip https authentication
This command specifies the authentication methods for http server users. The additional methods
of authentication are used only if the previous method returns an error, not if it fails. To ensure that
the authentication succeeds even if all methods return an error, specify
none
as the final method in
the command line. If
none
is specified as an authentication method after
radius
, no
authentication is used if the radius server is down..
no ip https authentication
This command restores the authentication methods to the default for http server users.
ip http secure-port
This command is used to set the SSL port where port can be 1-65535 and the default is port 443.
Format
no ip http secure-session hard-timeout
Mode Privileged EXEC
Format
ip https authentication method1 [ method2 ... ]
Mode Global ConfigC
Term Definition
Local Uses the local username database for authentication.
Radius Uses the list of all RADIUS servers for authentication.
Tacacs Uses the list of all TACACS servers for authentication.
None Uses no authentication.
Format
no ip https authentication method1 [ method2 ... ]
Mode Global Config
Default 443