Managed Switch CLI Manual, Release 8.0
Log Messages
8-17
v1.0, July 2009
Routing/IPv6 Routing
Table 8-35: CoS Log Message
Component
Message
Cause
COS
cosCnfgrInitPhase3Process: Unable to
apply saved config -- using factory defaults
The COS component was unable to apply
the saved configuration and has initialized to
the factory default settings.
Table 8-36: DiffServ Log Messages
Component
Message
Cause
DiffServ
diffserv.c 165: diffServRestore Failed to
reset DiffServ. Recommend resetting device
While attempting to clear the running
configuration an error was encountered in
removing the current settings. This may
lead to an inconsistent state in the system
and resetting is advised.
DiffServ
Policy invalid for service intf: "policy
name
,
intIfNum
x
, direction
y
The DiffServ policy definition is not
compatible with the capabilities of the
interface specified. Check the platform
release notes for information on
configuration limitations.
Table 8-37: DHCP Relay Log Messages
Component
Message
Cause
DHCP relay
REQUEST hops field more than config value The DHCP relay agent has processed a
DHCP request whose HOPS field is larger
than the maximum value allowed. The relay
agent will not forward a message with a hop
count greater than 4.
DHCP relay
Request's seconds field less than the config
value
The DHCP relay agent has processed a
DHCP request whose SECS field is larger
than the configured minimum wait time
allowed.
DHCP relay
processDhcpPacket: invalid DHCP packet
type: %u\n
The DHCP relay agent has processed an
invalid DHCP packet. Such packets are
discarded by the relay agent.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
