Managed Switch CLI Manual, Release 8.0
Switching Commands
3-146
v1.0, July 2009
When you specify a value for
<vlan_id>
, the following information appears:
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
Term
Definition
VLAN ID
The VLAN ID.
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the VLAN.
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on the VLAN.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group
on a particular interface, which is participating in the VLAN, before deleting the interface
from the entry.This value may be configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface, participating in
the VLAN, because it did not receive a report for a particular group on that interface. This
value may be configured.
Multicast
Router Expiry
Time
The amount of time to wait before removing an interface that is participating in the VLAN
from the list of interfaces with multicast routers attached. The interface is removed if a
query is not received. This value may be configured.
Format
show igmpsnooping mrouter interface
<unit/slot/port>
Mode
Privileged EXEC
Term
Definition
Interface
The port on which multicast router information is being displayed.
Multicast
Router
Attached
Indicates whether multicast router is statically enabled on the interface.
VLAN ID
The list of VLANs of which the interface is a member.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
