Managed Switch CLI Manual, Release 8.0
Quality of Service (QoS) Commands
5-28
v1.0, July 2009
show policy-map
This command displays all configuration information for the specified policy. The
<policyname>
is the name of an existing DiffServ policy.
If the Policy Name is specified the following fields are displayed:
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Term
Definition
DiffServ Admin mode
The current value of the DiffServ administrative mode.
Class Table Size
Current /Max
The current number of entries (rows) and the maximum allowed entries (rows) in
the Class Table.
Class Rule Table Size
Current /Max
The current number of entries (rows) and the maximum allowed entries(rows) in
the Class Rule Table.
Policy Table Size
Current /Max
The current number of entries (rows) and the maximum allowed entries(rows) in
the Policy Table.
Policy Instance Table
Size Current /Max
Current number of entries (rows)
and the maximum allowed entries(rows)
in
the Policy Instance Table.
Policy Attribute Table
Size Current /Max
Current number of entries (rows) and the maximum allowed entries(rows) in the
Policy Attribute Table.
Service Table Size
Current /Max
The current number of entries (rows) i and the maximum allowed entries(rows) in
the Service Table.
Format
show policy-map [policyname]
Mode
Privileged EXEC
Term
Definition
Policy Name
The name of this policy.
Policy Type
The policy type (Only inbound policy definitions are supported for this platform.)
Term
Definition
Assign Queue
Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specify
which one of the supported hardware queues are used for handling packets belonging to
the class.
Class Name
The name of this class.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
