Managed Switch CLI Manual, Release 8.0
Captive Portal Commands
9-17
v1.0, July 2009
show captive-portal configuration status
Use this command to display information about all configured captive portal configurations or
about a specific captive portal configuration. The <
1-10
> is captive portal ID. If <1-10> is not
entered, all the configurations are displayed.
If the interface is specified, the following terms are displayed.
Format
show captive-portal configuration [ <1-10> ] status
Mode
Privileged EXEC mode
Term
Definition
CP ID
The captive portal instance ID
CP Name
The captive portal instance name
Mode
The operational mode is enabled or disabled.
Protocol Mode
The protocol mode is https or http.
Verification Mode
The user verification mode has three modes: guest , local and radius. The default is
guest mode.
Term
Definition
Group Name
The name of the group associated with this captive portal instance.
Redirect URL Mode
The redirect mode for this captive portal instance
Redirect URL
The redirect URL is up to 512 characters.
Session Timeout
Logout once session timeout is reached (seconds).
Idle Timeout
Logout once idle timeout is reached (seconds).
Max Bandwidth Up
Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send
data into the network.
Max Bandwidth
Down
Maximum client receive rate (b/s). Limits the bandwidth at which the client can receive
data from the network.
Max Input Octets
Maximum number of octets the
user is allowed to transmit.After this limit has been reached the user will be
disconnected.
Max Output Octets
Maximum number of octets the user is allowed to receive. After this limit has been
reached the user will be disconnected.
Max Total Octets
Maximum number of octets the user is allowed to transfer (sumof octets transmitted and
received). After this limit has been reached the user will be disconnected.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
