Managed Switch CLI Manual, Release 8.0
Switching Commands
3-16
v1.0, July 2009
no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning tree to
the default value.
spanning-tree max-hops
This command sets the MSTP Max Hops parameter to a new value for the common and internal
spanning tree. The max-hops value is a range from 6 to 40.
no spanning-tree max-hops
This command sets the Bridge Max Hops parameter for the common and internal spanning tree to
the default value.
spanning-tree mst
This command sets the Path Cost or Port Priority for this port within the multiple spanning tree
instance or in the common and internal spanning tree. If you specify an
<mstid>
parameter that
corresponds to an existing multiple spanning tree instance, the configurations are done for that
multiple spanning tree instance. If you specify 0 (defined as the default CIST ID) as the
<mstid>
, the configurations are done for the common and internal spanning tree instance.
Format
no spanning-tree max-age
Mode
Global Config
Default
20
Format
spanning-tree max-hops
<1-127>
Mode
Global Config
Format
no spanning-tree max-hops
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
