Managed Switch CLI Manual, Release 8.0
Switching Commands
3-80
v1.0, July 2009
storm-control broadcast level (Global)
This command configures the broadcast storm recovery threshold for all interfaces as a percentage
of link speed and enables broadcast storm recovery. If the mode is enabled, broadcast storm
recovery is active, and if the rate of L2 broadcast traffic ingressing on an interface increases
beyond the configured threshold, the traffic will be dropped. Therefore, the rate of broadcast traffic
will be limited to the configured threshold.This command also enables broadcast storm recovery
mode for all interfaces.
no storm-control broadcast level
This command sets the broadcast storm recovery threshold to the default value for all interfaces
and disables broadcast storm recovery.
storm-control broadcast rate (Global)
Use this command to configure the broadcast storm recovery threshold for all interfaces in packets
per second. If the mode is enabled, broadcast storm recovery is active, and if the rate of L2
broadcast traffic ingressing on an interface increases beyond the configured threshold, the traffic is
dropped. Therefore, the rate of broadcast traffic is limited to the configured threshold.
Format
no storm-control broadcast
Mode
Global Config
Default
5
Format
storm-control broadcast level
<0-100>
Mode
Global Config
Format
no storm-control broadcast level
Mode
Global Config
Default
0
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
