Managed Switch CLI Manual, Release 8.0
Utility Commands
6-59
v1.0, July 2009
show hosts
Use this command to display the default domain name, a list of name server hosts, the static and
the cached list of host names and addresses <
ame
> ranges from 1-255 characters. This command
displays both IPv4 and IPv6 entries.
..
Example: The following shows example CLI display output for the command.
<Switch> show hosts
Host name......................... Device
Default domain.................... gm.com
Default domain list............... yahoo.com, Stanford.edu, rediff.com
Domain Name lookup................ Enabled
Number of retries................. 5
Retry timeout period.............. 1500
Name servers (Preference order)... 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host Addresses
------------------------------ ------------------------------
accounting.gm.com 176.16.8.8
Host
Total Elapsed
Type
Addresses
--------------- -------- ------ -------- --------------
Format
show hosts [name]
Mode
User EXEC
Field
Description
Host Name
Domain host name.
Default Domain
Default domain name.
Default Domain
List
Default domain list.
Domain Name
Lookup
DNS client enabled/disabled.
Number of
Retries
Number of time to retry sending Domain Name System (DNS) queries.
Retry Timeout
Period
Amount of time to wait for a response to a DNS query.
Name Servers
Configured name servers.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
