Managed Switch CLI Manual, Release 8.0
Management Commands
7-70
v1.0, July 2009
priority
Use the
priority
command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The
<priority>
parameter specifies the
priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
timeout
Use the
timeout
command in TACACS Configuration mode to specify the timeout value in
seconds. If no timeout value is specified, the global value is used. The
<timeout>
parameter has
a range of 1-30 and is the timeout value in seconds.
show tacacs
Use the
show tacacs
command to display the configuration and statistics of a
server.
Default
0
Format
priority
<priority>
Mode
TACACS Config
Format
timeout
<timeout>
Mode
TACACS Config
Format
show tacacs
[<ip-address|hostname>]
Mode
Privileged EXEC
Term
Definition
Host Address
The IP address or hostname of the configured server.
Port
The configured server port number.
TimeOut
The timeout in seconds for establishing a TCP connection.
Priority
The preference order in which servers are contacted. If a server
connection fails, the next highest priority server is contacted.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
