Managed Switch CLI Manual, Release 8.0
Switching Commands
3-2
v1.0, July 2009
•
“LLDP-MED Commands” on page 3-168
•
“Denial of Service Commands” on page 3-179
•
“MAC Database Commands” on page 3-191
•
“ISDP Commands” on page 3-193
Port Configuration Commands
This section describes the commands you use to view and configure port settings.
interface
This command gives you access to the Interface Config mode, which allows you to enable or
modify the operation of an interface (port).
interface range
This command gives you access to a range of port interfaces, allowing the same port configuration
to be applied to a set of ports.
Warning:
The commands in this chapter are in one of three functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the
configuration setting.
•
Clear commands clear some or all of the settings to factory defaults.
Format
interface
<unit/slot/port>
Mode
Global Config
Format
interface range <unit/slot/port>-<unit/slot/port>
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
