Managed Switch CLI Manual, Release 8.0
Routing Commands
4-19
v1.0, July 2009
The following shows example CLI display output for the command.
(Switch) #show ip route summary
Connected Routes..............................1
Static Routes.................................7
RIP Routes....................................0
BGP Routes....................................0
OSPF Routes...................................0
Intra Area Routes...........................0
Inter Area Routes...........................0
External Type-1 Routes......................0
External Type-2 Routes......................0
Reject Routes.................................2
Total routes..................................8
show ip route preferences
This command displays detailed information about the route preferences. Route preferences are
used in determining the best route. Lower router preference values are preferred over higher router
preference values. A route with a preference of 255 cannot be used to forward traffic.
Reject Routes
Total number of reject routes installed by all protocols.
Total Routes
Total number of routes in the routing table.
Format
show ip route preferences
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Local
The local route preference value.
Static
The static route preference value.
OSPF Intra
The OSPF Intra route preference value.
OSPF Inter
The OSPF Inter route preference value.
OSPF External
The OSPF External route preference value.
RIP
The RIP route preference value.
Term
Definition
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
