Managed Switch CLI Manual, Release 8.0
Switching Commands
3-166
v1.0, July 2009
Example: The following shows example CLI display output for the command.
(Switch) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the remote device.
System
Description
Describes the remote system by identifying the system name and versions of hardware,
operating system, and networking software supported in the device.
Port
Description
Describes the port in an alpha-numeric format. The port description is configurable.
System
Capabilities
Supported
Indicates the primary function(s) of the device.
System
Capabilities
Enabled
Shows which of the supported system capabilities are enabled.
Management
Address
For each interface on the remote device with an LLDP agent, lists the type of address the
remote LLDP agent uses and specifies the address used to obtain information related to
the device.
Time To Live
The amount of time (in seconds) the remote device's information received in the
LLDPDU should be treated as valid information.
Term
Definition
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
