Managed Switch CLI Manual, Release 8.0
Management Commands
7-29
v1.0, July 2009
User Account Commands
This section describes the commands you use to add, manage, and delete system users. The 7000
series software has two default users: admin and guest. The admin user can view and configure
system settings, and the guest user can view settings.
username
This command adds a username-based authentication system.
User Name
The name the user entered to log on to the system.
Connection
From
IP address of the remote client machine or EIA-232 for the serial port connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
Session Type
Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH.
Note:
You cannot delete the admin user. There is only one user allowed with read/write
privileges. You can configure up to five read-only users on the system.
Format
username
<name>
password
<password>
[level
level
] [encrypted]
Mode
Global Config
Term
Definition
Name
The name of the user, up to 20 characters.
Password
The password for the users 8-64 characters.
level
Specifies the user level. If not specified, the privilege level is 1. The value can be 1-15.
encrypted
Encrypted password you enter, copied from another device configuration.
Term
Definition
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
