Managed Switch CLI Manual, Release 8.0
Switching Commands
3-199
v1.0, July 2009
debug isdp packet
This command enables tracing of ISDP packets processed by the switch. ISDP must be enabled on
both the device and the interface in order to monitor packets for a particular interface.
no debug isdp packet
This command disables tracing of ISDP packets on the receive or the transmit sides or on both
sides.
ISDPv2 Packets
Transmitted
Total number of ISDPv2 packets transmitted
ISDP Bad Header
Number of packets received with a bad header
ISDP Checksum Error
Number of packets received with a checksum error
ISDP Transmission Failure
Number of packets which failed to transmit
ISDP Invalid Format
Number of invalid packets received
ISDP Table Full
Number of times a neighbor entry was not added to the table due to a full
database
ISDP IP Address Table Full
Displays the number of times a neighbor entry was added to the table
without an IP address.
Format
debug isdp packet [{receive | transmit}]
Mode
Privileged EXEC
Format
no debug isdp packet [{receive | transmit}]
Mode
Privileged EXEC
Term
Definition
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
