Managed Switch CLI Manual, Release 8.0
Captive Portal Commands
9-4
v1.0, July 2009
Example
(switch)#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
CP IP Address................. 1.2.3.4
show captive-portal status
Use this command to report the status of all captive portal instances in the system.
Term
Definition
Administrative
Mode
The administrative mode is enabled or disabled.
Operational Status
The Operational status is enabled or disabled.
Disable Reason
If the operational status is disabled. This field shows the reason why the operational is
disabled.
CP IP Address
It is the captive portal server IP address.
Format
show captive-portal status
Mode
Privileged EXEC mode
Term
Definition
Additional HTTP
Port
The additional HTTP port for captive portal to monitor. Captive portal only monitors
port 80 by default.
Additional HTTP
Secure Port
The additional HTTPs port for captive portal to monitor. Captive portal only monitors
port 443 by default.
Peer Switch Statistics Reporting Interval
Authentication
Timeout
The timeout for the authentication page to be served again.
Supported Captive
Portals
The maximum number of captive portal instances supported by switch. It supports up
to 10 instances.
Configured Captive
Portals
The number of created captive portal instances.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
