Installation Guide
Connection
Configuration
Modem
Internet
© 2022 TP-Link 7106509681 REV1.0.0
Omada VPN Router with 10G Ports
Option 1: Standalone Mode
Open a web browser and type the default management address
192.168.0.1
in the address field of the browser, then press the
Enter
key.
2.
Connect a computer to a LAN port of the router with an RJ45 cable
properly. If your computer is configured with a fixed IP, change it to
Obtain
an IP address automatically
.
1.
For detailed configurations, refer to the User Guide of the router. The guide
can be found on the download center of our official website:
https://www.tp-link.com/support/download/
.
Create a username and a password for subsequent login attempts and
for security.
3.
Use the username and password set above to log in to the webpage.
4.
After a successful login, you can configure the function by clicking the
setup menu on the left side of the screen.
5.
The router supports two configuration options:
Standalone Mode: Configure and manage the router singly.
Controller Mode: Configure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as
access points, switches, and gateways.
Router
PC
In Standalone Mode, use a computer to configure and manage the router.
Note: When the router is managed by a controller, configurations of the router will be overridden by the controller.
ER8411
AC Power Cord
LED
Indic
a
tion
P
W
R1*
On
:
T
he router is powered by P
W
R1.
O
ff
:
P
W
R1 is disconnected or it works improperly
,
or the router is powered o
ff
.
P
W
R2
G
r
een On
:
T
he router is powered by P
W
R2.
Ye
ll
o
w
On**
:
P
W
R2 are connected
,
but the router is powered by P
W
R1.*
O
ff
:
P
W
R2 is disconnected or it works improperly
,
or the router is powered o
ff
.
SYS
F
las
hin
g
:
T
he router works properly.
On o
r
O
ff
:
T
he router works improperly.
Q
u
ick F
las
hin
g
:
T
he router is being reset.
FAN
G
r
een On
:
T
he fan works properly.
Ye
ll
o
w
On
:
T
he fan works improperly.
U
SB
For
U
SB Modem
:
G
r
een F
las
hin
g
:
A modem is connected and it is initializing.
G
r
een On
:
T
he modem is loaded.
O
ff
:
No modem is inserted
,
or it is corrupted or incompatible.
For
U
SB Storage
:
G
r
een On
:
A
U
SB storage de
v
ice is inserted and identi
fi
ed.
O
ff
:
No
U
SB storage de
v
ice is inserted
,
or it is corrupted or incompatible.
SFP+ (Port 1
-
2)
G
r
een On
:
Running at 10 Gbps
,
but no acti
v
ity.
G
r
een F
las
hin
g
:
Running at 10 Gbps and transmitting or recei
v
ing data.
Ye
ll
o
w
On
:
Running at 1000 Mbps
,
but no acti
v
ity.
Ye
ll
o
w
F
las
hin
g
:
Running at 1000 Mbps and transmitting or recei
v
ing data.
O
ff
:
No de
v
ice is linked to the corresponding port.
On
:
Running at 1000 Mbps
,
but no acti
v
ity.
F
las
hin
g
:
Running at 1000 Mbps and transmitting or recei
v
ing data.
O
ff
:
No de
v
ice is linked to the corresponding port.
RJ45 (Port 4
-
11)
G
r
een On
:
Running at 1000 Mbps
,
but no acti
v
ity.
G
r
een F
las
hin
g
:
Running at 1000 Mbps and transmitting or recei
v
ing data.
Ye
ll
o
w
On
:
Running at 100/10 Mbps
,
but no acti
v
ity.
Ye
ll
o
w
F
las
hin
g
:
Running at 100/10 Mbps and transmitting or recei
v
ing data.
O
ff
:
No de
v
ice is linked to the corresponding port.
*P
W
R1 is the primary power supply and it takes priority o
v
er P
W
R2.
**
W
hen both P
W
R1 and P
W
R2 work properly and the router is powered by P
W
R1
,
it takes 10
-
20
seconds for the LED P
W
R2 (yellow) to go out.
SFP (Port 3)
