Managed Switch CLI Manual, Release 8.0
Utility Commands
6-13
v1.0, July 2009
If you enter the
interface <unit/slot/port>
parameter, in addition to the MAC
Address and Status fields, the following field appears:
The following information displays if you enter the
count
parameter:
show process cpu
This command provides the percentage utilization of the CPU by different tasks.
The following shows example CLI display output.
(Switch) #show process cpu
Memory Utilization Report
status bytes
Term
Definition
VLAN ID
The VLAN on which the MAC address was learned.
Term
Definition
Dynamic
Address count
Number of MAC addresses in the forwarding database that were automatically learned.
Static Address
(User-defined)
count
Number of MAC addresses in the forwarding database that were manually entered by a
user.
Total MAC
Addresses in
use
Number of MAC addresses currently in the forwarding database.
Total MAC
Addresses
available
Number of MAC addresses the forwarding database can handle.
Note:
It is not necessarily the traffic to the CPU, but different tasks that keep the CPU
busy.
Format
show process cpu
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
