Managed Switch CLI Manual, Release 8.0
Utility Commands
6-38
v1.0, July 2009
show sntp server
This command is used to display SNTP server settings and configured servers.
For each configured server:
Term
Definition
Client Supported
Modes
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version
The highest SNTP version the client supports.
Port
SNTP Client Port.
Client Mode
Configured SNTP Client Mode.
Format
show sntp server
Mode
Privileged EXEC
Term
Definition
Server Host
Address
IP address or hostname of configured SNTP Server.
Server Type
Address Type of Server.
Server Stratum
Claimed stratum of the server for the last received valid packet.
Server
Reference ID
Reference clock identifier of the server for the last received valid packet.
Server Mode
SNTP Server mode.
Server Maximum
Entries
Total number of SNTP Servers allowed.
Server Current
Entries
Total number of SNTP configured.
Term
Definition
Host Address
IP address or hostname of configured SNTP Server.
Address Type
Address Type of configured SNTP server.
Priority
IP priority type of the configured server.
Version
SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port
Server Port Number.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
