Managed Switch CLI Manual, Release 8.0
Utility Commands
6-61
v1.0, July 2009
no capture receive packet
This command disables the capturing of receive packets.
capture all packets
This command enables the capturing of receive packets.
no capture all packets
This command disables the capturing of all packets.
capture wrap
This command enables the Buffer Wrapping configuration. Once the capture buffer is full, writes
to the buffer will wrap around to allow continuous packet caputure.
show capture packets
This command displays packets being captured from the buffer. The output of the show command
can be redirected to a text file. The resultant text file can be fed to the
text2pcap
utility or the
Ethereal public domain packet analyzer, which can then be translated to a cap file.
Format
no capture receive packet
Mode
Global Config
Format
capture all packet
Mode
Global Config
Format
no capture all packets
Mode
Global Config
Format
capture wrap
Mode
Global Config
Default
Enabled
Format
show capture packets
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
