Managed Switch CLI Manual, Release 8.0
Switching Commands
3-145
v1.0, July 2009
show igmpsnooping
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled.
When the optional arguments
<unit/slot/port>
or
<vlan_id>
are not used, the command
displays the following information:
When you specify the
<unit/slot/port
> values, the following information appears:
Format
show igmpsnooping
[<unit/slot/port> | <vlan_id>]
Mode
Privileged EXEC
Term
Definition
Admin Mode
Indicates whether or not IGMP Snooping is active on the switch.
Multicast
Control Frame
Count
The number of multicast control frames that are processed by the CPU.
Interface
Enabled for
IGMP Snooping
The list of interfaces on which IGMP Snooping is enabled.
VLANS Enabled
for IGMP
Snooping
The list of VLANS on which IGMP Snooping is enabled.
Term
Definition
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the interface.
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on the interface.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group
on a particular interface before deleting the interface from the entry.This value may be
configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface because it did
not receive a report for a particular group on that interface. This value may be configured.
Multicast
Router Expiry
Time
The amount of time to wait before removing an interface from the list of interfaces with
multicast routers attached. The interface is removed if a query is not received. This value
may be configured.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
