Managed Switch CLI Manual, Release 8.0
Utility Commands
6-26
v1.0, July 2009
clear config
This command resets the configuration to the factory defaults without powering off the switch.
When you issue this command, a prompt appears to confirm that the reset should proceed. When
you enter
y
, you automatically reset the current configuration on the switch to the default values. It
does not reset the switch.
clear mac-addr-table
This command clears the dynamically learned MAC addresses of the switch.
clear logging buffered
This command clears the messages maintained in the system log.
clear counters
This command clears the statistics for a specified
<unit/slot/port>,
for all the ports, or for
the entire switch based upon the argument.
Format
clear config
Mode
Privileged EXEC
Format
clear mac-addr-table
Mode
Privileged EXEC
Format
clear logging buffered
Mode
Privileged EXEC
Format
clear counters {<unit/slot/port> | all}
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
