Managed Switch CLI Manual, Release 8.0
Management Commands
7-23
v1.0, July 2009
ip http authentication
This command specifies the authentication methods for http server users. The additional methods
of authentication are used only if the previous method returns an error, not if it fails. To ensure that
the authentication succeeds even if all methods return an error, specify none as the final method in
the command line. For example If none specified as an authentication method after radius, no
authentication is used if the radius server is down..
no ip http authentication
This command restores the authentication methods to the default.
ip http session maxsessions
This command limits the number of allowable un-secure HTTP sessions. Zero is the configurable
minimum.
Format
ip http authentication
method1
[
method2 ...
]
Mode
Global ConfigC
Term
Definition
Local
Uses the local username database for authentication.
Radius
Uses the list of all RADIUS servers for authentication.
Tacacs
Uses the list of all TACACS servers for authentication.
None
Uses no authentication.
Format
no ip http authentication
method1
[
method2 ...
]
Mode
Global Config
Default
16
Format
ip http session maxsessions
<0-16>
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
