Managed Switch CLI Manual, Release 8.0
Switching Commands
3-137
v1.0, July 2009
10
11
1
65 25
1
1 0
20
1
0
8 2
0
1 1
clear ip arp inspection statistics
Use this command to reset the statistics for Dynamic ARP Inspection on all VLANs.
show ip arp inspection interfaces
Use this command to display the Dynamic ARP Inspection configuration on all the DAI-enabled
interfaces. An interface is said to be enabled for DAI if at least one VLAN, that the interface is a
member of, is enabled for DAI. Given a unit/slot/port interface argument, the command displays
the values for that interface whether the interface is enabled for DAI or not.
Example: The following shows example CLI display output for the command.
(Switch) #show ip arp inspection interfaces
Interface
Trust State
Rate Limit
Burst Interval
(pps) (seconds)
--------------- ----------- ---------- ---------------
0/1 Untrusted 15 1
Default
none
Format
clear ip arp inspection statistics
Mode
Privileged EXEC
Format
show ip arp inspection interfaces [unit/slot/port]
Mode
• Privileged EXEC
• User EXEC
Term
Definition
Interface
The interface ID for each displayed row.
Trust State
Whether the interface is trusted or untrusted for DAI.
Rate Limit
The configured rate limit value in packets per second.
Burst Interval
The configured burst interval value in seconds.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
