Managed Switch CLI Manual, Release 8.0
Management Commands
7-53
v1.0, July 2009
radius accounting mode
This command is used to enable the RADIUS accounting function.
no radius accounting mode
This command is used to set the RADIUS accounting function to the default value - i.e. the
RADIUS accounting function is disabled.
radius server attribute
This command specifies the RADIUS client to use the NAS-IP Address attribute in the RADIUS
requests. If the specific IP address is configured while enabling this attribute, the RADIUS client
uses that IP address while sending NAS-IP-Address attribute in RADIUS communication.
no radius server attribute
The
no
version of this command disables the NAS-IP-Address attribute global parameter for
RADIUS client. When this parameter is disabled, the RADIUS client does not send the NAS-IP-
Address attribute in RADIUS requests.
Default
disabled
Format
radius accounting mode
Mode
Global Config
Format
no radius accounting mode
Mode
Global Config
Format
radius server attribute <4> [<
ipaddr
>]
Mode
Global Config
Term
Definition
4
NAS-IP-Address attribute to be used in RADIUS requests.
ipaddr
The IP address of the server.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
