Managed Switch CLI Manual, Release 8.0
Switching Commands
3-18
v1.0, July 2009
spanning-tree mst instance
This command adds a multiple spanning tree instance to the switch. The parameter
<mstid>
is a
number within a range of 1 to 4094, that corresponds to the new instance ID to be added. The
maximum number of multiple instances supported by the switch is 4.
no spanning-tree mst instance
This command removes a multiple spanning tree instance from the switch and reallocates all
VLANs allocated to the deleted instance to the common and internal spanning tree. The parameter
<mstid>
is a number that corresponds to the desired existing multiple spanning tree instance to
be removed.
spanning-tree mst priority
This command sets the bridge priority for a specific multiple spanning tree instance. The
parameter
<mstid>
is a number that corresponds to the desired existing multiple spanning tree
instance. The priority value is a number within a range of 0 to 61440 in increments of 4096.
Format
no spanning-tree mst
<mstid> <cost | external-cost | port-priority>
Mode
Interface Config
Default
none
Format
spanning-tree mst instance
<mstid>
Mode
Global Config
Format
no spanning-tree mst instance
<mstid>
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
