Managed Switch CLI Manual, Release 8.0
Captive Portal Commands
9-15
v1.0, July 2009
Example
(switch)#show captive-portal configuration 1
CP ID..................................... 1
CP Name................................... cp1
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
Blocked Status............................ Not Blocked
Authenticated Users....................... 0
show captive-portal configuration interface
Use this command to display information about all interfaces assigned to a captive portal
configuration or about a specific interface assigned to a captive portal configuration. The <
1-10
>
is the captive portal ID. If you do not specify an interface number, all the interfaces assigned to the
captive portal configuration will be displayed.
Format
show captive-portal configuration
<1-10>
Mode
Privileged EXEC mode
Term
Definition
CP ID
The captive portal ID
CP Name
The captive portal instance name
Operational Status
The operational status is enabled or disabled.
Disable Reason
If the operational status is disabled, this field shows the reason.
Blocked Status
Blocked status shows if this captive portal instance block all traffic.
Authenticated
Users
The authenticated users by this captive portal instance.
Format
show captive-portal configuration <1-10> interface
[
<unit/slot/
port>
]
Mode
Privileged EXEC mode
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
