Managed Switch CLI Manual, Release 8.0
Management Commands
7-56
v1.0, July 2009
(Switch) (Config) #radius server host auth 192.168.37.60 name
Network1_RADIUS_Auth_Server port 1813
(Switch) (Config) #radius server host acct 192.168.37.60 name
Network2_RADIUS_Auth_Server
(Switch) (Config) #no radius server host acct 192.168.37.60
radius server key
This command configures the key to be used in RADIUS client communication with the specified
server. Depending on whether the 'auth' or 'acct' token is used, the shared secret is configured for
the RADIUS authentication or RADIUS accounting server. The IP address or hostname provided
must match a previously configured server. When this command is executed, the secret is
prompted.
Text-based configuration supports Radius server’s secrets in encrypted and non-encrypted format.
When you save the configuration, these secret keys are stored in encrypted format only. If you
want to enter the key in encrypted format, enter the key along with the encrypted keyword. In the
show running config command’s display, these secret keys are displayed in encrypted format. You
cannot show these keys in plain text format.
The following shows an example of the CLI command.
radius server key acct 10.240.4.10 encrypted <encrypt-string>
Note:
The secret must be an alphanumeric value not exceeding 16 characters.
Format
radius server key {
auth | acct
}
{<
ipaddr|dnsname
>} encrypted
<
password
>
Mode
Global Config
Field
Description
ipaddr
The IP address of the server.
dnsname
The DNS name of the server.
password
The password in encrypted format.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
