Managed Switch CLI Manual, Release 8.0
Switching Commands
3-161
v1.0, July 2009
no lldp notification
Use this command to disable notifications.
lldp notification-interval
Use this command to configure how frequently the system sends remote data change notifications.
The
<interval>
parameter is the number of seconds to wait between sending notifications. The
valid interval range is 5-3600 seconds.
no lldp notification-interval
Use this command to return the notification interval to the default value.
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
Default
disabled
Format
no lldp notification
Mode
Interface Config
Default
5
Format
lldp notification-interval
<interval>
Mode
Global Config
Format
no lldp notification-interval
Mode
Global Config
Format
clear lldp statistics
Mode
Privileged Exec
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
