Managed Switch CLI Manual, Release 8.0
Captive Portal Commands
9-9
v1.0, July 2009
redirect-url
Use this command to configure the redirect URL for a captive portal configuration. The url is the
URL for redirection which can be up to 512 characters in length.
max-bandwidth-down
Use this command configures the maximum rate at which a client can receive data from the
network. The rate is in bits per seconds. 0 indicates limit not enforced.
no max-bandwidth-down
Use this command to reset the maximum rate to the default.
max-bandwidth-up
Use this command to configure the maximum rate at which a client can send data into the
network. The rate is
in bits per seconds. 0 indicates limit not enforced.
Format
no redirect
Mode
Captive Portal Instance mode
Format
redirect-url
url
Mode
Captive Portal Instance mode
Default
0
Format
max-bandwidth-down
<0-536870911>
Mode
Captive Portal Instance mode
Format
no max-bandwidth-down
Mode
Captive Portal Instance mode
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
