Managed Switch CLI Manual, Release 8.0
Switching Commands
3-15
v1.0, July 2009
no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal spanning
tree to the default value.
spanning-tree guard
This command selects whether loop guard or root guard is enabled on an interface. If neither is
enabled, then the port operates in accordance with the multiple spanning tree protocol.
no spanning-tree guard
This command disables loop guard or root guard on the interface.
spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and internal
spanning tree. The max-age value is in seconds within a range of 6 to 40, with the value being less
than or equal to
2 x (Bridge Forward Delay - 1)
.
Format
no spanning-tree forward-time
Mode
Global Config
Default
none
Format
spanning-tree guard
{ none | root | loop }
Mode
Interface Config
Format
no spanning-tree guard
Mode
Interface Config
Default
20
Format
spanning-tree max-age
<6-40>
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
