Managed Switch CLI Manual, Release 8.0
Routing Commands
4-13
v1.0, July 2009
no ip mtu
This command resets the ip mtu to the default value.
encapsulation
This command configures the link layer encapsulation type for the packet. The encapsulation type
can be
ethernet
or
snap
.
clear ip route all
This command removes all the route entries learned over the network.
show ip brief
This command displays all the summary information of the IP, including the ICMP rate limit
configuration and the global ICMP Redirect configuration.
Format
no ip mtu <mtu>
Mode
Interface Config
Default
ethernet
Format
encapsulation {ethernet | snap}
Mode
Interface Config
Note:
Routed frames are always ethernet encapsulated when a frame is routed to a
VLAN.
Format
clear ip route all
Mode
Privileged EXEC
Protocol
Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or
RIP.
Total Number
of Routes
The total number of routes.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
