manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

 

EPICenter Reference Guide

6

The Firmware Menu...........................................................................................................174
Pop-Up Menus ..................................................................................................................174
Software and BootROM Image Locations .............................................................................175
The Firmware Manager Main Window ..................................................................................176

Obtaining Updated Software Images .........................................................................................179

Obtaining New Software Images .........................................................................................179
Acknowledging the Version Changes ....................................................................................182
Checking for Version Availability .........................................................................................182

Upgrading the Software or BootROM on Your Switches ...............................................................182

Upgrading Your Switches Using the Upgrade Wizard.............................................................183
Image Selection ................................................................................................................183
Hardware Selection ...........................................................................................................185
Operation Selection ...........................................................................................................189
Upgrade Preview ...............................................................................................................190
Performing a Multi-Step Upgrade........................................................................................191

Specifying the Current Software Versions...................................................................................194

Configuring the TFTP Server.....................................................................................................195

Chapter 7: The Interactive Telnet Feature ..................................................................................... 197

Overview of the Interactive Telnet Feature .................................................................................197

Using Telnet with Extreme Networks Switches ...........................................................................197

Using Telnet Macros................................................................................................................199

Built-in Telnet Macros .......................................................................................................199

The Macro Player ....................................................................................................................200

Playing a Macro ................................................................................................................202
Using Variables in a Macro .................................................................................................203
Configuring a Repeat Interval .............................................................................................204
Viewing Macro Results .......................................................................................................204
Loading a Saved Macro ......................................................................................................207

The Macro Editor ....................................................................................................................208

Creating Macros for Context-Based Replay ...........................................................................210
Saving a Macro .................................................................................................................214
Loading a Macro for Editing ...............................................................................................214
Deleting a Macro ...............................................................................................................214
Importing Macros ..............................................................................................................214
Exporting a Macro .............................................................................................................216

Running a Telnet Session on an Individual Switch......................................................................216

Copy/Paste from an Interactive Telnet Session .....................................................................217
Macro Recording and Playback from an Interactive Telnet Session .........................................218

Using Interactive Telnet with Third-Party Devices .......................................................................219

Chapter 8: The Grouping Manager ................................................................................................ 221

Overview of the Grouping Manager ............................................................................................221

Grouping Manager Functions ....................................................................................................223

Grouping Manager Function Buttons ...................................................................................223
The Grouping Menu ...........................................................................................................224
Resource Detail Buttons ....................................................................................................224

Displaying EPICenter Groups and Resources ..............................................................................225

Resource Details ...............................................................................................................226

Creating a New Resource .........................................................................................................228

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

McDATA OPENconnectors Command Line Interface Manual preview
OPENconnectors
Brand: McDATA Pages: 170
Tascam GigaStudio 3.04 Supplement Sheet preview
GigaStudio 3.04
Brand: Tascam Pages: 2
Adobe CAPTIVATE 2 Use Manual preview
CAPTIVATE 2
Brand: Adobe Pages: 306
Novell DATA SYNCHRONIZER - UPDATE 1 Installation Manual preview
DATA SYNCHRONIZER - UPDATE 1
Brand: Novell Pages: 9
GE eKEY User Manual preview
eKEY
Brand: GE Pages: 82
Samsung LN32D467E1H Software Manual preview
LN32D467E1H
Brand: Samsung Pages: 1
Samsung MZ-7PC064D Specifications preview
MZ-7PC064D
Brand: Samsung Pages: 2
Samsung S1A0905-S0B0 Quick Start Manual preview
S1A0905-S0B0
Brand: Samsung Pages: 6
Samsung MZ-7PC064D User Manual preview
MZ-7PC064D
Brand: Samsung Pages: 59
DeLorme Topo North America User Manual preview
Topo North America
Brand: DeLorme Pages: 369
Capcom Xbox360 MotoGP08 User Manual preview
Xbox360 MotoGP08
Brand: Capcom Pages: 28
DivX 10 User Manual preview
10
Brand: DivX Pages: 59
Globalsat GPS Information User Manual preview
GPS Information
Brand: Globalsat Pages: 7
AMX AXCENTWire Instruction Manual preview
AXCENTWire
Brand: AMX Pages: 24
TYAN AST2050 User Manual preview
AST2050
Brand: TYAN Pages: 41
UNIBLUE DRIVERSCANNER Quick Start Manual preview
DRIVERSCANNER
Brand: UNIBLUE Pages: 3
Oracle Secure Backup 10.3 Installation And Configuration Manual preview
Secure Backup 10.3
Brand: Oracle Pages: 174
Brother PE-Design Next Installation Manual preview
PE-Design Next
Brand: Brother Pages: 16

Brands by name

Popular brands

Load more brands