Extreme Networks EPICenter 6.0 Reference Manual Download Page 155 | Manualshive

Page: 155 / 580

background image

Archiving Configuration Settings

EPICenter Reference Guide

155

Click

Apply

to set the global upload schedule for devices that do not have an individually set

configuration schedule.

Setting Archive Limits

You can limit the number of archived configuration files EPICenter keeps for a device to prevent
accumulated files from using too much disk space on the EPICenter server. You can set a limit either by
specifying the number of files kept for each device, or by specifying how long to keep files.

NOTE

Archive limits apply only to files created automatically through a scheduled upload.

To set archive limits, select the Archive Limit tab in the Schedule Upload window (as shown in

Figure 68

).

Figure 68: Archive Limits window

The archive limit settings you can select are:

No Limit

An unlimited number of files can be saved for each device. This is the default.

Number of copies per device to
keep

Specifies the number of files to keep for each device. When the limit is
reached, the oldest files for the device are deleted.

Days to keep the configuration files

Specifies that EPICenter should not keep configuration files that are older than
the time limit. When a configuration file exceeds the age limit, it is deleted.

«
...
153
154
155
156
157
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

C8 - DocuPrint Color Inkjet Printer

Brand: Xerox Pages: 458

Brand: Xerox Pages: 2

C8 - DocuPrint Color Inkjet Printer

Brand: Xerox Pages: 51

IFOLDER 3 - ADMINISTRATION

Brand: Novell Pages: 148

Brand: Barco Pages: 22

Brand: RTS Pages: 51

Brand: I.R.I.S. Pages: 182

8.5 EMAIL SERVER EDITION - V 85.4

Brand: AVG Pages: 52

Brand: Mackie Pages: 8

SMART Notebook SE

Brand: SMART Pages: 20

Brand: Bosch Pages: 40

Divar Archive Player

Brand: Bosch Pages: 10

Brand: Bosch Pages: 86

DINION IP 5000 MP

Brand: Bosch Pages: 112

DS-605 - VPN Client - PC

Brand: D-Link Pages: 15

DSN-210-SW - SureSync Continuous Data Protection

Brand: D-Link Pages: 4

Brand: D-Link Pages: 56

D-View 6 Professional

Brand: D-Link Pages: 143

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands