Extreme Networks EPICenter 6.0, Reference Manual

Page: 297 / 580

The New Menu
EPICenter Reference Guide
297
Figure 139: Adding a new map
To give the submap a different name, select the submap node, and change the name in the name field in
the Information panel. The change will take effect when you click away from the submap node.
You can also change the name of any map (including the Root Map) by clicking slowly twice on the
name in the Map Tree Hierarchy. This puts you into an edit mode where you can change the name.
When editing the map name in either location, you can cancel the edit with the [Esc] key, as long as you
have not yet committed it.
You can commit the change with the [Enter] key, or by clicking in a different panel from the one where
you are editing.
New Device Map Node
You can add device nodes to your map by doing one of the following:
●
Select New Device Map Node from the New menu.
●
Right-click on the map background to display the pop-up menu, then select New Device Map Node .
●
Click the “ Create new device map” node icon on the icon bar.
A pop-up window appears with a list of all devices currently known to EPICenter, that are not already
used somewhere in this view. A count of devices in the list is displayed at the top of the window. If all
devices known to EPICenter are already placed in this view, a message window informs you of that
fact.
To add a device node to the map, select the device and click OK . The device node will appear on the
map, identified by the information from EPICenter’s inventory database.