Extreme Networks EPICenter 6.0 Reference Manual Download | Manualshive

Page: 70 / 580

background image

The Inventory Manager

EPICenter Reference Guide

70

NOTE

To configure SSH2 on a device, the device must be running a version of the ExtremeWare software that supports
SSH2. For more information on configuring a device to use SSH2, see the ExtremeWare Software Users Guide.

3

To configure SNMP information for the device, click the SNMP tab, as shown in

Figure 26

, and enter

or change the information as necessary.

Figure 26: SNMP tab for Add Device window

The fields under this tab are as follows:

Device Group

The Device Group to which this device should belong. Default is the default
group for managed devices.

Additional Info

Any additional information you want to be included with this device. Maximum
of 255 characters.

SNMP Version

Select the SNMP version from the SNMP Version pull-down menu.

SNMP Read Community String

If the device is using SNMP version 1, enter the SNMP Read Community string
for the device. The default (for Extreme Networks devices) is

public

.

SNMP Write Community String

If the device is using SNMP version 1, enter the SNMP Write Community string
for the device. The default is

private

.

SNMP V3 User Name

If the device is using SNMP version 3, enter the principal name used for SNMP
V3 authentication and security. The default is

initialmd5

.

SNMP V3 Privacy Protocol

If the device is using SNMP version 3, select SNMP V3 Privacy Protocol. Select
either No Privacy or CBC DES Privacy. The default is

No Privacy

.

«
...
68
69
70
71
72
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: QMS Pages: 118

Brand: Baracoda Pages: 9

WS02-NCTC1-E - 07-2001

Brand: Omron Pages: 116

Brand: NETGEAR Pages: 282

WayPoint Map Loader

Brand: Mobile Crossing Pages: 32

ILLUSTRATOR CS2 12.0.1

Brand: Adobe Pages: 6

Brand: Adobe Pages: 8

38043740 - ColdFusion Standard - Mac

Brand: Adobe Pages: 87

38039927 - Fireworks CS3 - PC

Brand: Adobe Pages: 369

Brand: Adobe Pages: 478

VB Directory System

Brand: VBrick Systems Pages: 21

StreamPlayer v4.4

Brand: VBrick Systems Pages: 32

ENTERPRISE MEDIA SYSTEM V5.0

Brand: VBrick Systems Pages: 76

FLEXCOLOR V4.5 -

Brand: Hasselblad Pages: 34

CONTRIBUTE 3 - DEPLOYING AND PUBLISHING SERVER

Brand: MACROMEDIA Pages: 38

Brand: palmOne Pages: 114

Brand: IBM Pages: 29

REGISTRYBOOSTER 2010 - V1

Brand: UNIBLUE Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands