Extreme Networks EPICenter 6.0, Reference Manual

Page: 488 / 580

Using the Policy Manager
EPICenter Reference Guide
488
Creating a New Policy
To create a network policy, follow these steps:
1 Select New from the toolbar. This displays a new Policy Definition page, as shown in
Figure 251 .
Figure 251: Policy description page for a new Access-based Security policy
2 Enter a name for the policy (required) and a description of the policy (optional).
3 If you do not want this policy to be configured onto any devices, click the Enabled check box once
to remove the check mark and indicate that this policy should not be enabled. The presence of a
check in the box indicates that the policy will be enabled, which is the default state.
4 Select a schedule for this policy, if desired. Default is 24 hours a day, 7 days a week. You can check
desired days, set start time on the 24-hour clock, and set time periods from 0 to 168 hours.
Scheduled times are allowed to overlap (see
Figure 252 ).
Policy
Service
Policy
Flow
direction (IP
and Security
policies only)
traffic
endpoint
selection
filter
specification
(IP and
Security)
access
domain
selection