Extreme Networks EPICenter 6.0 Reference Manual Download Page 509 | Manualshive

Page: 509 / 580

background image

EPICenter Reference Guide

509

18

The ACL Viewer

This chapter describes how to use the EPICenter Policy Manager for:

●

Viewing the policy configurations currently configured on Extreme devices

●

Viewing the policy configurations specified for a device through the EPICenter Policy Manager

●

Comparing policy configurations specified within the EPICenter Policy Manager with the policies
currently configured on a device

Using the ACL Viewer

The ACL Viewer lets you view information about the policies you’ve specified for the devices in your
network:

●

The traffic patterns computed from the policies you have defined.

●

The actual access list or QoS rules generated by the EPICenter Policy Manager, based on the policies
you have defined. It also shows the rules currently configured on a selected device, and lets you
compare the actual rules with the rules generated by the Policy Manager based on your policy
definitions. Rules for Access-based Security policies will normally only be displayed while the users
are logged into the network.

●

The QoS Profile settings for the devices managed by the EPICenter server.

The ACL Viewer shows information about the policies you’ve defined, even if they have not been
configured on the network. Thus, you can use the ACL Viewer to preview the rules you’ve specified
before they take effect on your network.

The ACL Viewer organizes information by device scope—information related to a policy is presented
relative to the currently selected resource (device or group).

To invoke the Policy Manager, click the

Policy

button in the Navigation Toolbar. When the Policy

Manager applet first appears, the

Policies View

is selected.

To view the access list and QoS rules currently defined for devices managed by the EPICenter Policy
Manager, click the

ACL Viewer

radio button just above the component tree. The ACL Viewer also

displays Network Login/802.1x activity for a specific device, slot, or port.

The ACL Viewer displays the Access List summary view for the top level of the component tree (the
Groups node) as shown in

Figure 266

. The Access List summary view provides an overview of the IP

policies defined in the Policy Manager, as related to their scope definitions.

«
...
507
508
509
510
511
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

RS232 interface for GT47 embedded apps UART

Brand: Sony Ericsson Pages: 14

Quality Monitoring

Brand: Nortel Pages: 22

Brand: Brady Pages: 33

Brand: Seagate Pages: 1

Vox Continental

Brand: Hollow Sun Pages: 9

Brand: GRASS VALLEY Pages: 2

Brand: GRASS VALLEY Pages: 24

AURORA INGEST - S AND UPGRADE INSTRUCTIONS V7.1

Brand: GRASS VALLEY Pages: 66

05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD

Brand: Autodesk Pages: 21

00128-051462-9340 - AutoCAD 2008 - PC

Brand: Autodesk Pages: 48

507B1-90A211-1301 - NavisWorks Manage 2010

Brand: Autodesk Pages: 472

BREEZE 5-MANAGER

Brand: MACROMEDIA Pages: 306

DEEP FREEZE ENTERPRISE

Brand: FARONICS Pages: 104

Brand: Buffalo Pages: 11

Brand: MACROMEDIA Pages: 3

JUPITER SOFT PANELS

Brand: GRASS VALLEY Pages: 2

Brand: Yamaha Pages: 16

Brand: Waves Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands