manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

The Firmware Manager

 

EPICenter Reference Guide

192

●

The final step is to upgrade to the destination software image version. This fulfills the requirement to 
upgrade the software image version to ExtremeWare version 6.1.9, ExtremeWare version 7.0.0, or 
other version range.

Obtaining the Image and BootROM Versions

Before you perform a multi-step upgrade, make sure that you have all of the required image and 
BootROM versions available on your EPICenter server. To get the image and BootROM versions, use the 
Live Update feature, as described in 

“Obtaining Updated Software Images” on page 179

.

The Multi-Step Upgrade Procedure

For “

i

-series” switches, EPICenter will automatically evaluate the selected images and devices to 

determine if multiple upgrade steps are required. Therefore, in the Image Selection page, you should 
select the image you want to have installed at the end of the entire multi-step process. 

A multi-step upgrade involves upgrading the switch multiple times in order to get from the source 
software image version to the destination software image version. EPICenter performs the upgrade 
procedure for each iterative step along the way.

For each iterative upgrade to the device during a multi-step upgrade, the Upgrade Wizard performs the 
following tasks:  

●

Backs up the current device configuration.

●

Performs the current upgrade (downloads the appropriate image).

●

Reboots the device.

●

If this was a software image upgrade, restores the device configuration and reboots the device again. 

●

Synchronizes the device and the EPICenter database.

NOTE

When the device reboots, the EPICenter server waits until the device reboot is complete and the device has 
loaded its configuration file. If the device reboot time is longer than the EPICenter server time-out period, the 
EPICenter server sync operation may time out. If this occurs, you should do another sync. 

At the end of a successful iteration, you must restart the Upgrade Wizard to initiate the next upgrade 
step. Again at the Image Selection page you select the final image you want installed so that EPICenter 
can calculate the remaining upgrade steps needed. 

If a multi-step upgrade is required, the EPICenter Upgrade Wizard displays a Multi-Step Upgrade page, 
similar to that shown in 

Figure 90

, after the Hardware Selection step. 

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

IBM E02HRLL-G - WebSphere Partner Gateway... Administration Manual preview
E02HRLL-G - WebSphere Partner Gateway...
Brand: IBM Pages: 268
Alcatel-Lucent AUTOMATED MESSAGE DELIVERY SYSTEM 5.0 Quick Start Manual preview
AUTOMATED MESSAGE DELIVERY SYSTEM 5.0
Brand: Alcatel-Lucent Pages: 4
Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Brand: Vaisala Pages: 168
Valgrind Software Quick Start Manual preview
Software
Brand: Valgrind Pages: 319
Raining Data Corporation mvEnterprise 4.1.0 on AIX Installation Manual preview
mvEnterprise 4.1.0 on AIX
Brand: Raining Data Corporation Pages: 64
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.1 Tuning Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.1
Brand: Red Hat Pages: 160
M-Audio Torq 1.5 User Manual preview
Torq 1.5
Brand: M-Audio Pages: 99
EEG HD480 iCap Manual preview
HD480 iCap
Brand: EEG Pages: 16
BARIX Streaming Client User Manual preview
Streaming Client
Brand: BARIX Pages: 51
Autodesk AUTOCAD ELECTRICAL - Brochure preview
AUTOCAD ELECTRICAL -
Brand: Autodesk Pages: 16
Autodesk AutoCAD Driver Operation Manual preview
AutoCAD Driver
Brand: Autodesk Pages: 22
Autodesk 46304-050008-1600A - Vault R4 Essentials Aotc Implementation Manual preview
46304-050008-1600A - Vault R4 Essentials Aotc
Brand: Autodesk Pages: 140
Autodesk 00126-050008-1620A - Autocad 2006 Essentials User Manual preview
00126-050008-1620A - Autocad 2006 Essentials
Brand: Autodesk Pages: 235
Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Getting Started preview
003A1-121111-1001 - AutoSketch v.9.0
Brand: Autodesk Pages: 130
Bacharach Fyrite User Software Installation Manual preview
Fyrite
Brand: Bacharach Pages: 12
PressReader Android Tablet Software User Manual preview
Android Tablet Software
Brand: PressReader Pages: 4
IBM Hub/Switch Installation Manual preview
Hub/Switch
Brand: IBM Pages: 590
Palm Phone Link Handbook Handbook preview
Phone Link Handbook
Brand: Palm Pages: 22

Brands by name

Popular brands

Load more brands