Extreme Networks EPICenter 6.0, Reference Manual

Page: 427 / 580

Wireless Reports
EPICenter Reference Guide
427
Figure 218: Rogue Access Point Detection Report
For each Rogue Access Point detected, the following information is provided:
You can view the details for each of the detected rogue APs through the Rogue Access Point Detail
Report.
Rogue Access Point Detail Report
This report shows you information about an AP that has been detected as a rogue, as well as
information about how and where it was detected.
Rogue AP MAC MAC address of the AP. Click the link in this cell to view the Rogue Access Point
Detail Report for this AP.
Manufacturer Manufacturer of the AP
Mode Wireless LAN RF mode: 802.11a, 802.11b, or 802.11g/b
Channel Radio frequency channel used by the rogue interface
SSID Service set ID for the wireless interface
Possible Connected Devices The switch(es) the EPICenter MAC Poller has determined could be where the
rogue AP is connected. There can be multiple devices in this field, if EPICenter
detected the MAC address on more than one switch.
Click the link in this cell to view a Device Details report for this device.
Nearest Detecting AP If multiple APs detected the rogue, the identity of the nearest detecting AP.
Click the link in this cell to view a Wireless Port Details report for this AP.
Nearest Detecting Location The location of the nearest detecting AP
First Detected The time at which this rogue AP was first detected