Extreme Networks EPICenter 6.0 Reference Manual Download

Page: 407 / 580

VLAN Reports

EPICenter Reference Guide

407

Voice VLAN Summary (Voice Over IP Reports)

To view a report of the voice VLANs known to the EPICenter software, click the

Voice VLAN

Summary

link in the left-hand panel.

Figure 202

shows example output.

Figure 202: Voice Over IP Reports (Voice Vlan Summary)

The information reported includes the following:

Click on a VLAN name to display the Voice over IP Details report for the devices in the VLAN.

The Voice over IP Details report displays the following information:

Click the VLAN name to display a detailed report for an individual VLAN.

VoIP Vlan Name

Name of the VLAN

Device List

IP addresses of devices with ports that are members of this VLAN, and the QoS Profile
configured for this VLAN on each device

Device Name

Name of the device

IP Address

IP address of the device

VLAN IP

The IP address and subnet mask assigned to the VLAN (if any) on the switch

Egress Port List

The ports specified as Egress ports for the VoIP VLAN

Number of Phone Ports

The number of ports that are available for use as IP phone ports

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands