manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

Modifying a VLAN

 

EPICenter Reference Guide

335

Refresh

 command, accessed from the VLAN menu or with the 

Refresh

 button, removes any VLANs 

which have been deleted from all switches but which still appear in the “By VLAN” view of the 
Component Tree. 

●

To remove deleted VLANs from the By VLAN Component Tree, click the 

Refresh

 button.

Modifying a VLAN

Users with Administrator or Manager access can modify the properties of a VLAN, and add and 
remove ports from the VLAN. If you have only Monitor access, you can not use this function. 

You can start the Modify VLAN process in two ways: 

●

Click the Modify icon in the VLAN Manager toolbar. 

Using this method you can modify both the VLAN membership (devices and ports) and the VLAN 
tag, and change the IP Forwarding behavior of a switch where the VLAN resides. You can also 
search for device connections between devices in the VLAN. 

If you are in the 

By VLAN

 view, and a VLAN is selected in the Component Tree before you click 

the Modify button, the Modify VLAN window will contain information on the selected VLAN. If 
you do not select a VLAN beforehand, you can select one from within the Modify VLAN window. 

See 

“Modifying a VLAN from the Toolbar” on page 335

 for details. 

●

In the 

By VLAN

 view, select a VLAN in the Component Tree, right-click to display the pop-up 

menu, and select Modify VLAN Membership. (This is not available if you are viewing By Switch.) 

Using this method you can modify the VLAN membership (add or remove devices and ports) of the 
VLAN selected in the Component Tree. You cannot change the IP Forwarding behavior of a switch 
or search for device connections using this method. See 

“Modifying a VLAN from the Component 

Tree Menu” on page 338

 for details. 

Modifying a VLAN from the Toolbar

If you want to modify the properties (tag and protocol filter) of a VLAN, or change the IP Forwarding 
behavior of a switch in addition to modifying the VLAN membership (devices and ports), you must use 
the 

Modify

 command from the VLAN Manager Toolbar. You can also search for device connections 

between devices in the VLAN. 

To start the Modify VLAN process from the Toolbar, follow these steps:

1

Click the 

Modify 

button in the VLAN Manager Toolbar. 

The Modify VLAN dialog, Properties & Ports page is displayed, as shown in 

Figure 162

. 

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

3Com NBX 100 Software Upgrade Instructions preview
NBX 100
Brand: 3Com Pages: 4
Garmin eTrex H - Hiking GPS Receiver Owner'S Manual preview
eTrex H - Hiking GPS Receiver
Brand: Garmin Pages: 100
Adobe ACROBAT 3D Manual preview
ACROBAT 3D
Brand: Adobe Pages: 822
Alphasmart AS 3000 Installation And User Manual preview
AS 3000
Brand: Alphasmart Pages: 4
Inalp Networks SmartWare R2.00 Software Configuration Manual preview
SmartWare R2.00
Brand: Inalp Networks Pages: 321
HP PROLIANT 56976839 Release Notes preview
PROLIANT 56976839
Brand: HP Pages: 16
HP ProLiant Power Interface Control Utility User Manual preview
ProLiant Power Interface Control Utility
Brand: HP Pages: 10
HP ProBook 6450b User Manual preview
ProBook 6450b
Brand: HP Pages: 181
HP ProLiant SL160s Installation Instructions Manual preview
ProLiant SL160s
Brand: HP Pages: 8
HP ProDesk 600 Maintenance And Service Manual preview
ProDesk 600
Brand: HP Pages: 245
HP ProBook 6445b - Notebook PC User Manual preview
ProBook 6445b - Notebook PC
Brand: HP Pages: 183
HP ProLiant Lights Out-100 User Manual preview
ProLiant Lights Out-100
Brand: HP Pages: 60
HP StorageWorks 2/64 - Core Switch Command Reference Manual preview
StorageWorks 2/64 - Core Switch
Brand: HP Pages: 830
HP StorageWorks 2/64 - Core Switch Installation Manual preview
StorageWorks 2/64 - Core Switch
Brand: HP Pages: 166
HP ProBook 6360b Maintenance And Service Manual preview
ProBook 6360b
Brand: HP Pages: 157
HP ProBook 6445b - Notebook PC Maintenance And Service Manual preview
ProBook 6445b - Notebook PC
Brand: HP Pages: 230
Sawgrass Aficio GX7000 Getting Started Manual preview
Aficio GX7000
Brand: Sawgrass Pages: 48
Sharp REACH User Manual preview
REACH
Brand: Sharp Pages: 16

Brands by name

Popular brands

Load more brands