Extreme Networks EPICenter 6.0 Reference Manual Download | Manualshive

Page: 518 / 580

background image

The ACL Viewer

EPICenter Reference Guide

518

The rows in the comparison display are displayed in colors that indicate the status of the rule:

The columns in the display show information as follows:

View Policy Rules

The Policy Rules display shows details of the Ideal Source Port QoS rules, as generated by the
EPICenter Policy Manager. The information in this display is as follows:

View Configured Rules

The Configured Rules display shows details of the VLAN QoS rules that are actually configured on the
device, either through the EPICenter Policy Manager or the ExtremeWare CLI. The information in this
display is as follows:

White

The rule is valid, and has been configured on the device. Both the Ideal and Configured
sides of the table are filled in.

Yellow

The EPICenter-generated “ideal” rule conflicts with a rule already configured on the
device. Two rules conflict when the traffic patterns for the rule are the same but the
treatment specified (the QoS profile) is different. Both the Ideal and Configured sides of
the table are filled in.

Blue

The rule is configured on the device, but it was not generated by the EPICenter Policy
Manager. Only the Configured side of the table is filled in for these rules.

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in policy precedence order.

Policy

Displays the name of the policy.

Ideal Rule VLAN

The VLAN specified by this policy.

Ideal Rule Profile

The QoS profile specified for this traffic flow by this policy.

Config Rule VLAN

The VLAN to which the QoS rule applies.

Config Rule Profile

The QoS profile that applies to this VLAN.

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in policy precedence order.

Policy

Displays the name of the policy.

VLAN

The VLAN specified by this policy.

Profile

The QoS profile that is specified for this VLAN by this policy.

To be used

Indicates whether the rule is acceptable for configuration on the device (not in conflict
with any other rules). Values for this column are:

• Yes, the rule can be used.

• No (duplicated) indicating that the rule duplicates another rule.

• No (disabled) indicating that the policy is disabled.

VLAN

Specifies the VLAN to which the VLAN QoS rule applies.

Profile

The QoS profile that applies to this traffic flow.

«
...
516
517
518
519
520
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Brand: Cabletron Systems Pages: 16

DEVICE FILTER MAC

Brand: FARONICS Pages: 2

Brand: IBM Pages: 4

SmartWare R2.00

Brand: Inalp Networks Pages: 321

Brand: Brocade Communications Systems Pages: 60

Brand: Mackie Pages: 8

Brand: Fortinet Pages: 4

ST905003BPA1E1-RK - Maxtor BlackArmor 500 GB External Hard Drive

Brand: Seagate Pages: 2

BACKUP AND RECOVERY 10 SERVER FOR LINUX -

Brand: ACRONIS Pages: 14

Backup & Recovery 10 Advanced Editions

Brand: ACRONIS Pages: 10

Brand: Adaptec Pages: 64

Brand: Avermedia Pages: 97

Brand: DigiDesign Pages: 39

Brand: Altigen Pages: 34

131018 - StorView Snapshot - Mac

Brand: LaCie Pages: 214

TASCAM PCM Recorder

Brand: Tascam Pages: 2

DocuPrint 100MX

Brand: Xerox Pages: 74

Brand: FieldServer Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands