Extreme Networks EPICenter 6.0 Reference Manual Download

Page: 374 / 580

EPICenter Reports

EPICenter Reference Guide

374

In the URL, replace

<host>

with the name of the system where the EPICenter server is running.

Replace

<port>

with the TCP port number that you assigned to the EPICenter Web Server during

installation (by default this is port 8080).

When the EPICenter browser start-up page appears, as shown in

Figure 177

, click

View Reports

the left-hand panel.

Figure 177: EPICenter Start-up page

You will be asked to log in; use the same user name and password as you use to log in to the EPICenter
server.

Reports Available in EPICenter

The EPICenter software provides the following reports and tools:

Table 40: EPICenter Reports

Report
Category

Report Name

Description

Main

• Extreme eSupport Export

Exports EPICenter data for use by Extreme
technical support. Accessible from the Main reports
page.

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands