Extreme Networks EPICenter 6.0, Reference Manual

Page: 303 / 580

The Edit Menu
EPICenter Reference Guide
303
NOTE
Cutting and pasting nodes does NOT preserve user-created links between the nodes. Links that are automatically
discovered may be recreated after the nodes are pasted, but links that were created manually must be recreated
manually.
Delete Map Nodes
You can delete selected device, decorative, or text nodes from the map, as opposed to cutting them for
later pasting.
●
You can delete a submap node as long as it is empty.
●
You cannot delete hyper nodes. A hyper node is deleted automatically when the actual node it
represents is deleted.
To delete one or more nodes, do the following:
1 Select the nodes you want to delete. You can select multiple nodes by using Shift-click (hold down
the shift key and click the cursor on the node you want to select).
2 Delete the nodes by doing one of the following:
■
Select Delete Map Nodes from the Edit menu.
■
Right-click on the map background to display the pop-up menu, then select Delete Map Nodes .
CAUTION
You will NOT be asked to confirm that you want to delete the nodes. If you delete nodes accidently, you will need to
add them again to the map.
Delete User Created Map Links
You can remove one or more user-created links from the map using the Delete User Created Map Links
command.
NOTE
You cannot delete links created automatically by EPICenter using this command. To remove links that no longer
exist, but are still shown as down links, use one of the Sync Links commands. See
“Sync Links for Map or Sync
Links for All Maps” on page 310
To delete one or more user-created links, do the following:
1 Select the links you want to delete. The Delete User Created Map Links command is not enabled
until a user-created link is selected.
You can select multiple links using Shift-click (hold down the shift key and click the link you want
to select).
2 Select Delete User Created Map Links from the Edit menu.
CAUTION
Links that have been deleted cannot be pasted. User-created links must be recreated manually.