Extreme Networks EPICenter 6.0, Reference Manual

Page: 166 / 580

Configuration Manager
EPICenter Reference Guide
166
To restore (download) a baseline configuration to a device, do the following:
1 Select a device group or All Devices from the drop-down menu in the Device Group field.
2 Select the device from the device list presented. You can only restore to one device at a time. You do
not need to select a configuration file as the baseline file is used.
3 For ExtremeWare devices, specify the target location for the configuration, and whether EPICenter
should save the file on the device after reboot.
4 To start the download, click the Apply button.
Viewing a Configuration File
The view feature allows you to look at the contents of a saved configuration or baseline file using either
a built-in viewer, or a file viewer of your choice. See
“Configuring a Viewer” on page 169 for
information on configuring a different file viewer.
To view a configuration file:
1 In the main Configuration Manager window, select the device with the configuration file you want
to view.
2 Select the configuration file you want to view.
For ExtremeXOS devices, you must expand the contents of the.zip file and select the configuration
file or a policy file from within the .zip file to view. You cannot use the View function by selecting
the .zip file. See
Figure 64 for an example of an expanded ExtremeXOS configuration .zip file.
3 Click the View button at the top of the window, or select View from the Config menu or from the
right-click pop-up menu.
If you have not selected a configuration file, if you select more than one file, or if you select a .zip file
(for devices running ExtremeXOS), the
View button and View commands are not available.
To view a baseline configuration file:
1 In the main Configuration Manager window, select the device whose baseline you want to view.
2 Select B aseline > View from the Config menu or from the right-click pop-up menu. If the device
does not have a saved baseline configuration, the Baseline > View command is not available.
The View Configuration window appears with the baseline file you selected displayed.
Figure 75 shows an example of the default configuration viewer.