Extreme Networks EPICenter 6.0 Reference Manual Download Page 520 | Manualshive

Page: 520 / 580

background image

The ACL Viewer

EPICenter Reference Guide

520

The display includes the following information:

Each port is listed separately in the table, as a rule is generated for each port specified by the policy,
even if they are specified in a single policy definition in the Policy Manager.

To view the Source Port QoS rules related to a device, select the device. The Source Port QoS page
displays a comparison of the “ideal” Source Port QoS rules (rules generated by the EPICenter Policy
Manager based on your policy definitions) and the rules actually configured on the device, as shown in

Figure 270

.

Figure 272: Source Port QoS display showing ideal and configured rules for a device

The

View

field at the top of the display lets you select how you want to view the device rules. You can

view the access list rules in three ways:

!

(exclamation point)

An empty column used to invoke a sort by policy precedence. Clicking the column
header will sort the policies in policy precedence order.

Policy

Displays the name of the policy.

Source Port

The device and port for which this policy is specified.

Profile

The QoS profile that applies to this VLAN.

Status

Indicates whether the traffic pattern is unique or if it duplicates another traffic pattern.

Compare policy and configured
rules

Select to compare the EPICenter-generated rules with the rules configured on the
device (as shown in

Figure 268

).

«
...
518
519
520
521
522
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

GPSMAP GPSMAP 196

Brand: Garmin Pages: 4

Brand: Garmin Pages: 2

AUTOMATED MESSAGE DELIVERY SYSTEM 5.0

Brand: Alcatel-Lucent Pages: 4

Pilot User's Android

Brand: Garmin Pages: 150

ENTERPRISE VIRTUALIZATION FOR DESKTOPS

Brand: Red Hat Pages: 14

APPLICATION STACK 2.2 RELEASE

Brand: Red Hat Pages: 22

VB Directory System

Brand: VBrick Systems Pages: 21

StreamPlayer v4.4

Brand: VBrick Systems Pages: 32

Brand: Adaptec Pages: 6

IBM OS/2 v2.x & Warp

Brand: Adaptec Pages: 6

Brand: AMX Pages: 24

AUTOCAD MECHANICAL

Brand: Autodesk Pages: 4

15606-011408-9300 - MAP R6.3 UPG

Brand: Autodesk Pages: 208

22505-051400-9000 - AutoCAD Electrical 2008

Brand: Autodesk Pages: 1304

Brand: Palm Pages: 30

SYSTEM PROFILER -

Brand: FARONICS Pages: 2

POWERSUITE 2010 - V1

Brand: UNIBLUE Pages: 13

Brand: DeLorme Pages: 280

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands