EPICenter Reference Guide
527
A
Event Types for Alarms
This appendix describes the events that can be detected through the EPICenter Alarm System:
●
SNMP Trap Events on page 527
●
Configuring SNMP Trap Events on page 534
●
RMON Rising and Falling Trap Events on page 535
●
EPICenter Events on page 535
Many of the events defined below are standard traps applicable to all MIB-2 devices managed by the
EPICenter server. Extreme Networks proprietary traps are identified as such. For Extreme Networks
devices, the level of support in ExtremeWare and ExtremeXOS is also indicated.
SNMP Trap Events
Table 58: SNMP Trap Events
Event
Definition
ExtremeWare/
ExtremeXOS
Version
Authentication Failed
This trap indicates that a SNMP request with an invalid
community string is issued to the device.
ExtremeWare All/
ExtremeXOS 11.2
BGP Backward
Transition
This event is generated when the BGP FSM moves from a
higher numbered state to a lower numbered state.
ExtremeWare 6.1.5
Not supported in
EXOS
BGP Established
This event is generated when the BGP FSM enters the
ESTABLISHED state.
ExtremeWare 6.1.5
Not supported in
EXOS
BGP M2 Max
Exceeded
Extreme Networks proprietary trap. Indicates that the number of
prefixes received over this peer session has reached the
maximum configured limit. (BGP4-V2)
EXOS 10.1
BGP M2 Threshold
Reached
Extreme Networks proprietary trap. Indicates that the number of
prefixes received over this peer session has reached the
threshold limit. (BGP4-V2)
EXOS 10.1
BGP Prefix Max
Exceeded
Extreme Networks proprietary trap. Indicates that the number of
prefixes received over this peer session has reached the
maximum configured limit.
ExtremeWare 6.2.2
Not supported in
EXOS
BGP Prefix Reached
Threshold
Extreme Networks proprietary trap. Indicates that the number of
prefixes received over this peer session has reached the
threshold limit.
ExtremeWare 6.2.2
Not supported in
EXOS
CPU Health Check
Failed
Extreme Networks proprietary trap. Indicates that the CPU
Health Check has failed.
CPU Utilization Falling
Threshold
Extreme Networks proprietary trap. CPU Utilization Falling Trap
is generated when the extremeCpuAggregateUtilization falls
below 80% of the extremeCpuUtilRisingThreshold.
ExtremeWare 6.2
Not supported in
EXOS
CPU Utilization Rising
Threshold
Extreme Networks proprietary trap. CPU Utilizations Rising trap
is generated when the value of extremeCpuAggregateUtilization
touches/crosses extremeCpuUtilRisingThreshold.
ExtremeWare 6.2
Not supported in
EXOS
Summary of Contents for EPICenter 6.0
