manualshive.com logo in svg

Extreme Networks EPICenter 6.0, Reference Manual

Introducing Extreme Networks EPICenter 6.0 manual - a comprehensive guide to optimize your network management. Download this user manual for free from manualshive.com and unleash the full potential of your network infrastructure. Seamlessly control, configure, and monitor your network with this essential resource at your fingertips.

Share
Download
background image

Displaying a VLAN

 

EPICenter Reference Guide

327

Information about VLAN configurations is obtained when a switch is added to the database. 

The VLAN Manager can display information either by VLAN (showing all the switches with ports that 
are members of a specific VLAN) or by switch (showing the VLANs that have members on a specific 
switch). 

●

Select the 

By VLAN

 button to display VLANs at the first level of the Component Tree. Listed under 

each VLAN is every switch that has the VLAN defined on it (see 

Figure 153

).

When the top level of the tree (the 

VLANs

 node) is selected, the right hand panel displays a list of 

all VLANs configured on the Extreme Networks switches included in the EPICenter database. The 

All VLANs

 display includes:

Select an individual VLAN to view a summary of the configuration of the switches and ports that 
are members of that VLAN. 

●

Select the 

By Switch

 button to display switches at the first level of the Component Tree. Listed 

under each switch is every VLAN that is defined on the switch, as shown in 

Figure 154

.

When the top level of the tree (the 

Switches

 node) is selected, the right hand panel displays a list of 

the Extreme Networks switches known to the EPICenter database on which VLANs are configured. 

Figure 154: VLAN Manager view By Switch, showing VLANs organized by device

Name

The VLAN name

Tag

The VLAN tag value (if any) or “Untagged”

Protocol

The protocol filter configured for the VLAN

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

Nortel CC MIS User Manual preview
CC MIS
Brand: Nortel Pages: 374
MACROMEDIA COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION... Getting Started preview
COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION...
Brand: MACROMEDIA Pages: 134
Paradyne OPENLANE User Manual preview
OPENLANE
Brand: Paradyne Pages: 86
Sling Media Slingbox User Manual preview
Slingbox
Brand: Sling Media Pages: 112
FARONICS DATA IGLOO Manual preview
DATA IGLOO
Brand: FARONICS Pages: 42
National Instruments LabVIEW User Manual preview
LabVIEW
Brand: National Instruments Pages: 63
EVGA PC-over-IP Administrative Interface User Manual preview
PC-over-IP Administrative Interface
Brand: EVGA Pages: 108
F-SECURE PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS Manual preview
PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS
Brand: F-SECURE Pages: 40
MINOLTA-QMS PageScope Software Manual preview
PageScope
Brand: MINOLTA-QMS Pages: 60
Spectra Logic Spectra nTier File Migrator User Manual preview
Spectra nTier File Migrator
Brand: Spectra Logic Pages: 92
pagertec DELUX Installation Instructions Manual preview
DELUX
Brand: pagertec Pages: 16
MACROMEDIA COLDFUSION 4.5-CFML LANGUAGE Reference preview
COLDFUSION 4.5-CFML LANGUAGE
Brand: MACROMEDIA Pages: 608
Oracle Retail Data Warehouse Installation Manual preview
Retail Data Warehouse
Brand: Oracle Pages: 35
Oracle Oracle7 Server 7.3 Getting Started Manual preview
Oracle7 Server 7.3
Brand: Oracle Pages: 202
MACROMEDIA FLEX-FLEX ACTIONSCRIPT LANGUAGE Reference preview
FLEX-FLEX ACTIONSCRIPT LANGUAGE
Brand: MACROMEDIA Pages: 830
ACD Systems ACDSEE 12 User Manual preview
ACDSEE 12
Brand: ACD Systems Pages: 232
Canon PowerShot A620 - 7.1MP Digital Camera Software Starter Manual preview
PowerShot A620 - 7.1MP Digital Camera
Brand: Canon Pages: 106
LapLink Gold Corporate 5 User Manual preview
Gold Corporate 5
Brand: LapLink Pages: 166

Brands by name

Popular brands

Load more brands