Extreme Networks EPICenter 6.0 Reference Manual Download

Page: 103 / 580

The Alarm Log Browser

EPICenter Reference Guide

103

●

Redundant Power Supply

(RPS) alarm condition (Extreme proprietary trap): This alarm indicates

that an attached redundant power supply is transmitting an alarm.

●

SNMP unreachable

(EPICenter event): This alarm indicates that EPICenter is unable to

communicate with a device using SNMP.

●

Stack Member down

(EPICenter event): EPICenter has detected that a stack member is down.

●

Stacking Link down

(EPICenter event): EPICenter has detected that a stack link is down.

The Alarm Log Browser

Click the

Alarm

button in the Navigation Toolbar to run the Alarm System applet and view the Alarm

Log Browser. The Alarm Log Browser page appears, as shown in

Figure 45

Figure 45: The Alarm Log Browser page

The

Alarm

button (icon) in the Navigation Toolbar acts as an alarm indicator—if it is displayed in red

instead of black, it indicates that at least one new alarm has occurred.

New alarm

Alarm summary

indicator

Acknowledged alarms

Current filter definition

Alarm System module tabs

Predefined filters

Number of alarms
displayed (per filter)

EPICenter standard menus

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands

Extreme Networks EPICenter 6.0, Reference Manual

Search results

Summary of Contents for EPICenter 6.0

Reviews:

Related manuals for EPICenter 6.0

Brands by name

Popular brands