Extreme Networks EPICenter 6.0 Reference Manual Download Page 173 | Manualshive

Page: 173 / 580

background image

EPICenter Reference Guide

173

6

The Firmware Manager

This chapter describes how to use the EPICenter Firmware Manager feature for:

●

Downloading a new ExtremeWare image to one or more devices.

●

Downloading a BootROM image to one or more devices.

●

Downloading a new Slot software image to one or more Extreme modules.

●

Downloading a BootROM image to one or more Extreme modules.

●

Specifying an ExtremeWare software image as the “recommended” image. The Firmware Manager
compares the image currently running in a switch to determine if the switch is running the
recommended or most current image.

●

Retrieving the latest ExtremeWare software images from Extreme.

●

Performing a multi-step upgrade to upgrade software and BootROM images on Extreme

i

-series

devices.

Overview of the Firmware Manager

The EPICenter Firmware Manager feature provides a graphical interface for managing versions of
ExtremeWare and ExtremeXOS software images and BootROM images, and upgrading Extreme devices
as appropriate. The Firmware Manager provides a framework for storing image and BootROM files,
and allows tracking of multiple versions. It also provides an automated function that can check the
Extreme web site and indicate when newer versions of these files are available.

To start the Firmware Manager feature, click the

Firmware

button in the EPICenter Navigation Toolbar.

Firmware Manager Functions

There are multiple ways to invoke the functions provided by the Firmware Manager:

●

Using the menus at the top of the main Firmware Manager frame

●

Using the function buttons shown directly below the EPICenter Firmware menus

●

Using commands from a pop-up menu that appears when you right-click on a device or device
group entry in the Component Tree.

For simplicity, most of the instructions in this chapter only specify one method of invoking a function
(usually the function button).

«
...
171
172
173
174
175
...
»

Summary of Contents for EPICenter 6.0





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 6.0

010-10307-00 - MapSource Fishing Hot Spots

Brand: Garmin Pages: 30

Brand: TAA Pages: 28

ProfinetCommander

Brand: ProfiNet Pages: 25

GlobalScan NX Server 5/Server 32/Server 750

Brand: Ricoh Pages: 6

Brand: Novation Pages: 93

Brand: Paradyne Pages: 86

FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH

Brand: MACROMEDIA Pages: 830

ANTI-VIRUS 2011 - REV 2011.11

Brand: AVG Pages: 209

Active Management Technology v4.0

Brand: Intel Pages: 143

MOBILE SECURITY 3.1 FOR S60

Brand: F-SECURE Pages: 31

Application Update

Brand: TomTom Pages: 11

Brand: GRASS VALLEY Pages: 4

Brand: MINOLTA-QMS Pages: 42

05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD

Brand: Autodesk Pages: 21

00128-051462-9340 - AutoCAD 2008 - PC

Brand: Autodesk Pages: 48

18507-051452-9325 - UPG ARCH DESKTOP 2007

Brand: Autodesk Pages: 104

Application Server 10.1.3.4

Brand: Oracle Pages: 170

EDIRECTORY 8.8 SP1

Brand: Novell Pages: 150

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands